Model :

DS5C series

Power range (kw)

0.1Kw

Input power supply

Single/three phase AC200-240v,50/60Hz.Three-phase AC380V-440V,50/60Hz

Encoder feedback

17-bit/23-bit communication encoder

Control mode

Three-phase full wave rectifier lPM, PWM control, sine wave current drive mode

Ambient temperature

Operation:-10°C~40°C(no condensation)/storage: -20°C~60°C(no condensation)

Ambient humidity

Operation/storage: 90%RH and below (no condensation)

Vibration/shock resistance

4.9m/s2 / 19.6m/s?

Electronic CAM

None

Protection function

Overvotage, undervotage, overheating, overcurent, overload, overspeed, analog input abnormality, excessive position deviation, outputshort circuit, encoder abnormality,regeneration abnormality protection, overtravel protection, oscillation protection, phase loss protection, etc

Dynamic brake

None

Communication function

RS232:standard ModbusRTU protocolEtherCAT: support EtherCAT bus communication(max 32 axes)

Brake resistor

Built-in brake resistor, external brake resistor can be connected

Display and operate

5-bit LED indicator light, power indicator light, 4 buttons

Output form

No

Frequency division function

No

Collector Z phase output

Yes

Analog input :

No

Digital input (Sl):

3 channels (750W and below) 4 channels (above 750w)

Servo enable, alarm clear, no forward rotation, no reverse rotation, torque limit selection, internal speed selection, gear ratioswitching, mode switching, pulse input prohibition, zero speed locking, position deviation clear, internal position step change signal,internal control mode direction switching

Digital output (SO) :

3 channels(below llkW)4 channels(above 1lkW

Positioning completion, servo ready, alarm output, torque limit output, same speed detection, rotation detection, speed arrival,brake release output and warning output