2026
The general servo system has a complete product line,including five subseries of pulse type, bus type and full-function type, it has the characteristics of high-speedresponse, accurate synchronization, rapid adjustment,convenience and ease of use.Suitable for a variety ofapplications.Adaptive motor: MS5, MS6 series.
Home/Accessories/Consumables/General servo drive DS5P-20P1-PTA 0.1Kw/
Product Characteristics 1
WUXI XINJE ELECTRIC CO.,LTD
, ChinaModel :
DS5P series
Power range (kw)
0.1Kw
Input power supply
Single/three phase AC200-240v,50/60Hz.Three-phase AC380V-440V,50/60Hz
Encoder feedback
17-bit/23-bit communication encoder
Control mode
Three-phase full wave rectifier lPM, PWM control, sine wave current drive mode
Ambient temperature
Operation:-10°C~40°C(no condensation)/storage: -20°C~60°C(no condensation)
Ambient humidity
Operation/storage: 90%RH and below (no condensation)
Vibration/shock resistance
4.9m/s2 / 19.6m/s?
Electronic CAM
None
Protection function
Overvotage, undervotage, overheating, overcurent, overload, overspeed, analog input abnormality, excessive position deviation, outputshort circuit, encoder abnormality,regeneration abnormality protection, overtravel protection, oscillation protection, phase loss protection, etc
Dynamic brake
None
Communication function
RS232: standard ModbusRTUprotocol PROFINET:supportPROFINETbUScommunication(max64axes)
Brake resistor
Built-in brake resistor, external brake resistor can be connected
Display and operate
5-bit LED indicator light, power indicator light, 4 buttons
Output form
No
Frequency division function
No
Collector Z phase output
Yes
Analog input :
NO
Digital input (Sl):
5 channels ; Servo enable, alarm clear, no forward rotation, no reverse rotation, torque limit selection, internal speed selection, gear ratioswitching, mode switching, pulse input prohibition, zero speed locking, position deviation clear, internal position step change signal,internal control mode direction switching
Digital output (sO) :
3 channels ; Positioning completion, servo ready, alarm output, torque limit output, same speed detection, rotation detection, speed arrival,brake release output and warning output
Max input pulse frequencyNot support
Pulse command modeNot support
Control modePROFINET motion bus
Feedforward compensation0-100% (set the resolution to 1%)
Positioning complete width1~65535 command unit (set the resolution to l command unit)
Electronic gear ratio1/10000≤B/A≤10000
Control modeAnalog speed control (only Ds5F support), internal three segments ofspeed, external speed mode
Command smoothing modeLow pass filter, smooth filter
Analog input : Voltage rangeNo
Analog input : input impedanceNo
Torque limitInternal parameter
Speed change rate :1. External load rated change 0~100%: below +0.01% (at rated speed)
2. Rated voltage +10%: 0.01% (at rated speed)
3. Ambient temperature 20±25°C: below +0.01% (at rated speed)
Control modeAnalog speed control (only DS5F support),internal torque
Analog input : input impedanceNo
Analog input : Voltage rangeNo
Speed limitInternal parameter
Control axis number64
Communication protocolprofinet protocol
- Drive dimension diagram(Unit:mm)
- Help users better understand the operation of the equipment
- Servo communication interface
- Parameter setting interface
- Curve acquisition interface
- Real time observation interface
- Parameter comparison interface
- Mechanical property measurement interface
- Gain adjustment interface
- Monitor interface
- Tool interface
- Quick connector
- X-NET module
- Battery box
- JC-CB bus wiring cable
- B3 to AMP convertion cable
- DB9 side cable
- Power cable
- Encoder cable
- Regenerative resistor
- Differential module
Product Description
Technical Parameter
Configuration List
Technical Drawing
Related Pictures
Tell Us What You Need
