Product Feature:
1.JlS standard cylinder.
2.The seal of piston adopts heterogeneous two way seal struclure. lt's dimension is tight andit has the function of greasel reservation.
3.The Mickey Mouse-shaped aluminum barrel of JSl series has no tie rod and goodperformance of corrosion resistance.
4.Compared with 1S015552 standard cylinder, the cylinder of JSl series with the samecylinder diameter is shorter.
5.The buffer adjustment of cylinder is smooth and steady.
6.Cylinders and mounting accessories for installation with several specifcations are optional7.The seal material with high temperalure resistance is adopted to guarantee the normaloperation of cylinder at 150°C.

Installation & Usage:

1.When load changes in the work, the cylinder with abundant oulput capacity shall be ed
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosenunder the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, muchdust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40um or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7.The cylinder shall be carried out test run without load before application. Prior to run, buffershall be tumed to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8.The cylinder shall avoid the influence of side load in operalion to maintain the nomal workof cylinder and extend the service life.
9. lf the cylinder is dismantled and stored for a long time, please conduct anti-rust treatmentto the surface. Anti-dust caps shall be added in air inlet and outlet ports.